Kids love sleeping in tents, tipis and cabins of all kinds – and now yours can sleep tight under the stars from the comfort of their own room. This minimalist tipi tent bed frame is not only super cute, it can also be decorated in a million different ways. Better yet, it’s a whole lot easier than setting up a tent in the middle of a field: all you need is a saw and a few screws for this fun bed frame.

To make your tipi tent bed frame, you’ll need:

Please note: our frame is for a mattress measuring 60 x 120 cm, but it can easily be adapted to fit any child-sized mattress, such as 70 x 140 or 90 x 190. You can even build it on top of an existing bed frame for a tent bed with a bed base.

Choosing the right paint for a child’s bedroom

When it comes to painting children’s rooms or furniture, it’s important to read the ingredients carefully to avoid chemicals that could be dangerous to children.

– Ban the use of oil-based paints: they contain too many VOCs (volatile organic compounds) and formaldehyde, substances that are very harmful to human health and the environment.
– Water-based acrylic paints are less dangerous, but may also contain some harmful substances. Check the ingredients and avoid paints containing glycol ethers.
– Whenever possible, opt for paint that is specifically made for children’s rooms or environmentally-friendly or natural paints.
– No matter what paint you choose, make sure to air out the room for several hours after application.

For more information, see our guide, “How to paint a room”.

How to make a tipi tent bed frame for your children

Step 1: take the correct measurements

Create a unique tent bed frame for your children

Lay a wooden strip next to the mattress lengthwise and use a pencil to mark off the length you need for the frame (here it’s 120 cm). Next, measure the width you’ll need making sure to factor in the width of the strips (here it’s 60 cm + 2 x 2.8 cm = 65.6 cm).

Step 2: cut the wood and build the base frame

Cut the wood panel & build the base frame

Cut the wood strips with a jigsaw and then lightly sand the ends (you may also want to sand the edges if you’re using unfinished wood).

Build the base frame

Put the strips together to form a rectangle.

put the strips together to form a rectangle

One each side, pre-drill holes in the strips using one of the shorter wood drill bits. Then screw the 50 mm screws into the four corners.

Tip: For a professional look, use a countersink to form a small cavity in the wood before screwing. That will stop the head of your screw from sticking out.

Step 3: make the ends of the tipi tent

make the end of the tent bed frame

Put two wooden strips together to form a triangle, where the base is the head and foot of your frame, and check to see which height that would be best for your child’s bed. On one strip, use a pencil to mark the top of the tent frame and the point where the two strips will intersect. Use the same dimension to mark the other three strips with your pencil.

make the end of the tent bed frame

Cut the strips with a jigsaw and drill them at the point where they intersect. Use a bit that’s wider than your screws, as the latter will need to move around in the holes you’ve made. Sand everything until it’s smooth and splinter-free.

make the end of the tent bed frame

Screw the top ends together and attach the strips to the frame at the bottom after pre-drilling (it’s normal if they aren’t perfectly symmetrical).
This step is easier with the help of another person.

Step 4: attach the tent frame crossbar

Attach the cross bar to the tent bed frame

Once the sides are attached to the frame, measure the length you need for the central bar, which will reinforce your frame. To do this, place the uncut strip at the top of the ends (as seen here) and mark the inside of the strip with the pencil.

Attach the cross bar to the tent bed frame

Pre-drill the end of the crossbar in the middle, taking care not to split the wood, and attach the crossbar with the larger screw, drilling it into the end braces beforehand (as seen here).

Step 5: paint your tipi tent bed frame

paint your tipi tent bed frame

For the finishing touch, we decided to paint only the top of the frame. If you want the same effect, protect the strips with some masking tape at the desired height and then paint the top of the ends and the crossbar.

your children's very own tipi tent bed frame

Are your kids ready for more at home adventures? Make them a Montessori tangram puzzle and other toys, DIY connect 4 or even a Lego table with one of our tutorials.

Why not visit ManoMano for all your DIY, home & garden project needs?

Write A Comment