Many of us enjoy a cosy ambiance at home during the colder months, and often candles are a brilliant way to add an extra level of warmth to a room. If you’ve ever done any plumbing work at home, you’ve probably got some leftover copper pipes or fittings. Instead of letting them sit and gather dust, consider putting them to good use by transforming them into DIY candle holders!
You don’t have to be an experienced plumber, since copper pipes are easy to cut and glue. Even better, rose gold is still on trend, which means your copper candle holders will be perfect for the winter months and upcoming holiday season.

So, get ready to take the plunge and follow this DIY candle holder tutorial using copper pipes.

DIY candle holders

What you’ll need to make your DIY candle holders

For your copper candle holders, you’ll need:

How to make your own DIY candle holders

DIY candle holders tutorial

We’ve provided three models for your DIY candle holders:

  • the first one is very simple and consists only of 3 copper pipes cut to different heights
  • the second one uses fittings to create a 3-branch candle holder
  • for the third, we’ve replaced the copper pipes with wooden dowels and changed the shape of the structure by adjusting the direction and sequence of the fittings.

Experiment with the configuration if you like. For example, you can even link several tee joints together to get a candle table runner.

Cut the copper pipes or wooden dowels

Whichever model you choose, you’ll need to start by cutting the straight sections of your candle holder to size.

First, mark your pipe or dowel to the desired size.

Cut the pipes with a plumber’s pipe cutter.

Use a pipe cutter for the copper DIY candle holders

How to use a pipe cutter

With this tool, you can make perfect circular cuts on your copper pipes. First, loosen the adjustment knob—or another mechanism—on your cutter to insert copper pipe between the cutting blade and the rollers facing it. Tighten the knob—but not so much that you can’t move it later—until the pipe is held in place. Turn the tool around the pipe to make a groove in the metal. Tighten the knob a little with each turn. The groove will deepen until the pipe easily cuts in half.
Once you’ve cut the pipe, use the deburrer on its inside surface for a smooth finish. This step is optional because it’s commonly used for plumbing pipes before they are welded, which is not necessary for this project.

Sand your DIY copper pipes until they shine

Sand your DIY candle holders

Next, use steel wool for sanding your copper pipes. This not only cleans the metal but also polishes it, giving it an appealing copper-pink colour. In the photo above, you can see the sanded pipe on the left, which is much lighter than the raw pipe on the right. To ensure the colour keeps its hue, add a thin coat of metal varnish.

Assemble the copper pipes and fittings to create the main structure for your DIY candle holders.

For model 1 (single candle holder with three pipes), you only need three pipes (6, 9 and 13 cm, respectively).

Before gluing, insert the candles into each pipe. Force the candle in the opening if necessary and turn it to shape the wax for the holder.

Now remove the candles so you can glue the pipes together. Ensure the end of each pipe sits flat on the table. For this version, we’ve chosen to assemble three pipes, but you can easily create a larger model by multiplying the pieces of copper pipe you use.

How to choose your glue

You can use 2-part epoxy glue to bond the metal. In this case, choose a quick-drying glue that normally works after minutes. If you don’t use quick-drying glue, you will end up holding the structure in place while it dries.
You can also use hot melted glue sticks with a glue gun for quick bonding. Wear gloves to protect your hands from burns.

Once the structure is dry, put the candles back in their holders.

For model 2, you’ll be making a candle holder with three branches. For this one, you’ll need pieces of copper pipe—here, we used 7cm—plus three female 90° elbow fittings and a female tee connector.

Start by gluing the pipes into each part of your tee fitting.

Next, glue an elbow fitting, facing up, to each free end of the copper pipe.

Fit the copper together for your DIY candle holders

The tee joints can be linked together in a staggered pattern to create a “table runner” style candle holder with multiple branches.

To hold the candles in place, pour a little melted wax inside the fitting to keep it straight.

For model 3, we replaced the copper pipes with wooden dowels of the same diameter. We also used three 90° elbow fittings and a tee fitting, but in a different configuration.

Connect the fittings and wooden dowels

If you want to extend your candle holder or change the zig-zag configuration, you can simply rotate the last bend to add a wooden dowel. Then, you can add as many fittings and candles as you like!

Repeat the step used in model 2 to insert your candles into their holders.

Personalise your DIY candle holders

Did you enjoy this article on DIY candle holders made of copper? Why not read our DIY Christmas tree made of wood tutorial or even our fairy light buying guide!

Are you making your own DIY candle holders out of copper pipes too? Share your finished results with us on Instagram using the #mymanomanoway, #manomanouk and #youvegotthis hashtags!

Write A Comment